Technical data

SIP Attributes II (PGM 501)
The SIP Attributes 2 Program is used to set the SIP User table. The maximum table bin number
is 32.
IMPORTANT: --> This programming can only be done by using PC Admin.
User ID -- used to set the SIP User ID which is used in the
"From" Header (ex: [e-mail]
max. 64 digits of character string
Authentication User Name -- used to set the SIP
Authentication User Name if authentication is used.
max. 64 digits of character string
Authentication User Password -- used to set the SIP
Authentication User Password if authentication is used
max. 64 digits of character string
Contact Number -- used by the VOIB "Contact" header using
this field and VOIB IP address. Usually set the station number
or DID number to route this SIP UID.
max. 12 digits of character string
User ID Registration -- used to determine registration of this
SIP UID.
Provision / Register
User ID Usage -- allows you to choose whether or not to use
User ID.
On / Off
Associated Station -- used to support a SIP supplement
service for the Broad Works soft switch only:
- Click to dial
- Click to answer
- Voice Mail notify
station number
Release 3.5
June 2010