Technical data

SIP Programming (PGM 500-501) B-15
Appendix B: VoIP Service
SBX IP Programming & Operations Guide
SIP Programming (PGM 500-501)
SIP Attributes I (PGM 500)
The SIP Attribute 1 Program is used to set Proxy Server and DNS settings for the VOIB.
IMPORTANT: --> This programming can only be done by using PC Admin.
Proxy Server Address -- SIP proxy server address. max. 32 digits character string (e.g. abcd@efg)
Proxy Server Port -- SIP proxy port number. 0000-9999
Proxy Registration Timer -- SIP proxy server
registration timer.
0-65535 sec
Use Outbound Proxy -- usage of SIP outbound proxy. Off / On
Primary DNS Address -- IP address of primary DNS to
find SIP proxy.
max. 32 digits character string of IP address
(e.g. xxx.xxx.xxx.xxx)
Secondary DNS Address -- IP address of secondary
DNS to find SIP proxy.
max. 32 digits character string of IP address
(e.g. xxx.xxx.xxx.xxx)
Domain -- SIP user domain name. When a user makes
a SIP outgoing call, this domain name is added to
dialed digit. (ex. <dialed digit>@domain.name.com).
VALUE: max. 32 digits character string (e.g.
domain.name.com)
Connection Mode -- used to transport protocol of SIP. TCP / UDP
100Rel Support -- if this feature is set to ON, the
system supports 100Rel.
Off / On
Use R-port Method -- if feature is set to ON, the R-port
is supported.
Off / On
Use Single Codec Only -- if feature is set to ON, only a
single codec is supported.
Off / On
Remote Party ID -- used to support "Remote Party ID"
for CID.
Off / On
181 Message -- if feature is set to ON, the 181
message is supported.
Off / On
IP Centrex -- if feature is set to ON, IP centrex service
is supported.
Off / On
Release 3.5
June 2010