Technical data

Other VOIB Programming Codes B-10
Appendix B: VoIP Service
SBX IP Programming & Operations Guide
Gatekeeper Setting (PGM 341)
Press the [TRANS/PGM] button, dial 341, and follow the specific procedure:
Gatekeeper
Usage -- used to select
Gatekeeper for use or not.
PGM 341 + FLEX 1 + 0 (Off)
+ [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Gatekeeper Call Mode -- used to set the Call
Mode.
PGM 341 + FLEX 2 + 1
(Value) + [HOLD/SAVE]
VALUES --
0 = Direct
1 =
Gatekeeper Reroute
Gatekeeper Open H.245 -- used to open the
H245 port or not.
PGM 341 + FLEX 3 + 0 (Off)
+ [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Gatekeeper H.245 Tunneling PGM 341 + FLEX 4 + 0 (Off)
+ [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Gatekeeper Pre-granted ARQ PGM 341 + FLEX 5 + 0 (Off)
+ [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Gatekeeper Out of Band Flash PGM 341 + FLEX 6 + 0 (Off)
+ [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Gatekeeper Time to Live -- used to set the
interval of RRQ message.
PGM 341 + FLEX 7 + 030
(Value) + [HOLD/SAVE]
VALUES --
000-250 (sec)
Gatekeeper Address -- used to set the
Gatekeeper IP address to register (Skip: #).
PGM 341 + FLEX 8 + Value +
[HOLD/SAVE]
VALUES --
12-digit IP Address
Gatekeeper Find Address -- (Skip: #) PGM 341 + FLEX 9 + Value +
[HOLD/SAVE]
VALUES --
12-digit IP Address
Gatekeeper Find Port PGM 341 + FLEX 10 + 1718
(Value) + [HOLD/SAVE]
VALUES --
4-digit Port Number
Gatekeeper RAS Signal Port -- used to set
the
Gatekeeper RAS signal port.
PGM 341 + FLEX 11 + 1719
(Value) + [HOLD/SAVE]
VALUES --
4-digit Port Number
Gatekeeper Signal Port -- used to set the
Gatekeeper call signal port.
PGM 341 + FLEX 12 + 1720
(Value) + [HOLD/SAVE]
VALUES --
4-digit Port Number
VoIB
Gatekeeper ID -- used to set a unique
Gatekeeper's ID.
PGM 341 + FLEX 13 + Value
+ [HOLD/SAVE]
VALUES --
Up to 23 characters
Release 3.5
June 2010