Technical data

Other VOIB Programming Codes B-9
Appendix B: VoIP Service
SBX IP Programming & Operations Guide
Echo Canceler -- used to select the Echo
Canceller of VOIP board.
PGM 340 + FLEX 14 + 1 (Value)
+ [HOLD/SAVE]
VALUES --
0 = Off
1 = On
DTMF Mode -- used to set the DTMF mode of
the VOIP board.
PGM 340 + FLEX 15 + Value +
[HOLD/SAVE]
VALUES --
2 = Inband DTMF
3 = RFC 2833
4 = Outband DTMF
Jitter Buffer -- used to set the Jitter buffer of
VOIP board.
PGM 340 + FLEX 16 + 150
(Value ) + [HOLD/SAVE]
VALUES --
050-300 ms
Voice Monitor -- used to set the Voice Monitor
of the VOIP board
PGM 340 + FLEX 17 + 0 (Value)
+ [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Fax Mode -- If value is set to ON, a single ring
is provided and Attendant recall is not in
operation. (The fax feature is not supported on
SIP trunks at this time.)
PGM 340 + FLEX 22 + 0 (Off) +
[HOLD/SAVE]
VALUES --
0 = Off
1 = On
Release 3.5
June 2010