Technical data

Networking Programming Tables A-24
Appendix A: Networking Services
SBX IP Programming & Operations Guide
Networking CO Line Attributes (PGM 322)
1. Press the [TRANS/PGM] button and dial 322.
2. Enter the CO Line Range and follow the specific procedure:
Networking Routing Table (PGM 324)
1. Press the [TRANS/PGM] button and dial 324.
2. Dial Net Numbering Plan Table index (00-71) and follow the specific procedure:
FEATURE / DESCRIPTION PROCEDURE DEFAULT / VALUES
Networking CO Line Group -- used to select the
CO Line Group for networking calls.
PGM 322 + FLEX 1 + 00
(Net CO Line Group) +
[HOLD/SAVE]
VALUES --
Range = 00-24
VOIP Mode -- allows the choice of using H.323
or SIP at each VOIP CO line.
PGM 322 + FLEX 2 + 0
(Value) + [HOLD/SAVE]
VALUES --
0 = H.323
1 = SIP
Usage Gatekeeper -- used to check the usage
of the gatekeeper
PGM 322 + FLEX 3 + 0 (Off)
+ [HOLD/SAVE]
VALUES --
0 = On
1 = Off
Networking CO Line Type -- used to select the
type of system that is connected through the
networking CO line.
PGM 322 + FLEX 4 + 0
(PSTN) + [HOLD/SAVE]
VALUES --
0 = PSTN
1 = NET
DTMF Mode -- determines the DTMF Mode at
each VOIP CO line.
PGM 322 + FLEX 5 + 2
(Value) + [HOLD/SAVE]
VALUES --
2 = Inband DTMF
3 = RFC2833 DTMF
4 = Outband DTMF
FEATURE / DESCRIPTION PROCEDURE DEFAULT / VALUES
System Usage -- used to set the networking
connection type of the selected table entries.
PGM 324 + FLEX 1 + 0
(Value) + [HOLD/SAVE]
VALUES --
0 = NET
1 = PSTN
Net Numbering Plan Code -- used to set the
networking number code of the selected table
entries.
PGM 324+ FLEX 2 +
Numbering Plan Code (max.
16 digits - refer to VALUES) +
[HOLD/SAVE]
VALUES --
* = digits 0-9 can be
entered.
# = follows digits to
signify an int sta no
Release 3.5
June 2010