Technical data

Networking Programming Tables A-23
Appendix A: Networking Services
SBX IP Programming & Operations Guide
Networking Supplementary Attributes (PGM 321)
Press the [TRANS/PGM] button, dial 321, and follow the specific procedure:
Networking VPN Enable (Reserved) PGM 320 + FLEX 7 + OFF
(Value) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Networking Call Completion Retain Mode -- used to
set the networking supplementary signaling type of
the call completion. If this value is set to ON, the
signaling of call completion retain mode is executed.
PGM 320 + FLEX 8 + OFF
(Value) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
FEATURE / DESCRIPTION PROCEDURE DEFAULT / VALUES
Networking Transfer Mode -- used to select the
signaling type for networking transfer mode.
PGM 321 + FLEX 1 + 1
(Value) + [HOLD/SAVE]
VALUES --
0 = Join
1 = Reroute
TCP Port -- used to set the TCP port for BLF
messaging.
PGM 321 + FLEX 2 + Value
(4 digits) + [HOLD/SAVE]
VALUES --
Range = 0000-9999
Default = 9000
UDP Port -- used to set the UDP port for BLF
messaging.
PGM 321 + FLEX 3 + Value
(4 digits) + [HOLD/SAVE]
VALUES --
Range = 0000-9999
Default = 9001
BLF Manager IP Address -- used to set the IP
Address for the BLF manager.
PGM 321 + FLEX 4 + BLF
Manager IP Address +
[HOLD/SAVE]
VALUES --
12 digits
Duration of BLF Status -- used to set the
duration of BLF status messaging.
PGM 321 + FLEX 5 + 02
(secs - 2 digits) +
[HOLD/SAVE]
VALUES --
Range = 01-20
Multicast IP Address -- used to set the multicast
IP address for BLF service.
PGM 321 + FLEX 6 +
Multicast IP Address +
[HOLD/SAVE]
VALUES --
12 digits
Net Transfer Fault Recall Timer -- used to
designate the amount of time for the Network
Transfer Fault Recall timer.
PGM 321 + FLEX 7 + 010
(secs - 3 digits) +
[HOLD/SAVE]
VALUES --
Range = 001-300
VOIP Call Reroute CO Group -- used to set the
CO group of gatekeeper.
PGM 321 + FLEX 8 + 00
(Group No. - 2 digit) +
[HOLD/SAVE]
VALUES --
Range = 00-24
FEATURE / DESCRIPTION PROCEDURE DEFAULT / VALUES
Release 3.5
June 2010