Technical data

Attendant Service 1-14
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
For example, the office work starts at 9:00 a.m. and finishes at 5:00 p.m.during week days. The
weekend starts at 5:00 p.m. from Friday to Sunday. In this case, the WEEKLY TIME TABLE can
be set as shown:
OPERATION / SETUP
To change the Day/Night Service mode:
1. Press [TRANS/PGM], then press 074] and select a ring mode (1-6).
2. Press [HOLD/SAVE] to activate ring mode.
NOTE: Time can be set for each mode automatically using the Weekly Time Table.
SAMPLE WEEKLY TIME TABLE
WEEKLY TBL: MON
D:09:00 N:17:00 W:
WEEKLY TBL: TUE
D:09:00 N:17:00 W:
WEEKLY TBL: WED
D:09:00 N:17:00 W:
WEEKLY TBL: THU
D:09:00 N:17:00 W:
WEEKLY TBL: FRI
D:09:00 N: W:17:00
WEEKLY TBL: SAT
D: N: W:00:00
WEEKLY TBL: SUN
D: N: W:00:00
Weekly Time Table -- this table is
executed by the System
Attendant and each Intercom
Tenancy Group Attendant.
Time zone of
DAY/NIGHT/WEEKEND for 7
days is programmed.
PGM 233 + VALUE (Weekly
Time table, Range = 0-5) +
FLEX 1 (Day Mode, Range =
FLEX 1 - FLEX 7) + FLEX 1
(Day Start, Night Start,
Weekend Start, Lunch Start,
Lunch End, Range = FLEX
1-FLEX 5) + Enter Time
(HH/MM) + [HOLD/SAVE]
VALUES --
- Weekly Time Table (0-5)
- FLEX 1 (Day Mode F1-7)
F1 Monday
F2 Tuesday
F3 Wednesday
F4 Thursday
F5 Friday
F6 Saturday
F7 Sunday
- FLEX 1 (Start/End Time - HH/MM)
F1 - Day Start
F2 - Night Start
F3 - Weekend Start
F4 - Lunch Start
F5 - Lunch End
Release 3.5
June 2010