Technical data

Internet Protocol (H.450) A-16
Appendix A: Networking Services
SBX IP Programming & Operations Guide
OPERATION / SETUP
To activate Network Call Forward- Follow-Me
1. From the station that the calls will be forwarded to, press [SPEAKER] + [DND/FWD].
2. Dial the Follow-Me-Forward code (0) + the station number that is to be
Call-Forwarded from another system.
3. Dial the Authorization Code + the # button; the [DND/FWD] will flash at the Forwarding
station and a confirmation tone will be provided.
4. All calls to the Forwarding station will be routed to the Forwarded station.
To deactivate Network Call Forward - Follow-Me
At the User's own station, press the flashing [DND/FWD].
The [DND/FWD] will extinguish, and the Network Call Forward-Follow Me will be
cancelled.
Network Conference
Network Conference is generally the same as the regular Conference feature (see page 1-89),
with the additional specification that a networked station can be assigned as a conference
member.
A call to a station on one node is able to conference in a party on any other networked node.
Up to 3 stations of the network can be members of a conference.
CONDITIONS
• An IP phone cannot be the master station in the Network Conference.
• If an IP phone sends a Network Conference Invite Setup message to a Non-IP phone, the
message will be rejected.
• When a Non-IP phone sends a Network Conference invite to an IP phone, the IP phone
receives the normal Setup message in stead of the Invite Setup message.
• Also see "Multi-line Conferences" on page 1-89.
ADMIN PROGRAMMING
Set Networking Basic Attribute
Use PGM 320 … see page A-22.
Access Networking Routing Table - Numbering Plan
Use PGM 324 … see page A-24.
Release 3.5
June 2010