Technical data

Internet Protocol (H.450) A-15
Appendix A: Networking Services
SBX IP Programming & Operations Guide
Network Follow-Me Forward
A User from one system can activate a Follow-Me-Forward from a station on another system
within the network. Once activated, all calls to the Forwarded station will be forwarded to the
designated station over the network. The forward can only be cancelled from the Forwarded
station.
CONDITIONS
• An Authorization code must be registered to use Follow-Me Call Forward.
• Remote deactivation is not supported.
• The confirmation tone will be provided even though Follow-Me Forward may not be
allowed by the other system.
• Network Follow-Me Forward is available within a VoIP networking environment only.
• Among networked systems, the same Authorization code mode
(5 Digit /Variable Authorization code Usage) should be programmed.
ADMIN PROGRAMMING
Set Call Forward Attribute
Use PGM 111 … see page 1-182.
Access the Authorization Code Table
Use PGM 227 … see page 1-20
Set Networking Basic Attribute
Use PGM 320 … see page A-22.
Set Networking Supplementary Attributes - Transfer Mode
Use PGM 321 … see page A-23.
Set Networking CO Line Attribute
Use PGM 322 … see page A-24.
Access Networking Routing Table - Numbering Plan
Use PGM 324 … see page A-24.
Release 3.5
June 2010