Technical data

Attendant Service 1-13
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
ADMIN PROGRAMMING
Set the DISA Attribute
Use PGM 140 … see page 1-128
Set CO Line Ring Assignment
When CO Service Type (PGM 140) is set to Normal, incoming CO calls are routed
according to the destination assignment. The destination can be a station, Hunt Group,
VMIB announcement, Net-Station, or VM station number. The Ring Assignment is applied
separately to the Day/Night/Weekend/Lunch/On-Demand Ring Mode using FLEX 1-5.
Access Flexible DID Table
Use PGM 231 … see page 1-125.
Access Weekly Time Table
The Weekly Time Table can manage ring mode changes automatically. The use of the WEEKLY
TIME TABLE is executed by the System Attendant and each Intercom Tenancy Group
Attendant. The first table is for the System Attendant, and the others are for the Intercom
Tenancy Group Attendant.The table consists of 7 days - Monday, Tuesday, Wednesday,
Thursday, Friday, Saturday, & Sunday. On each day, the time zone of DAY/NIGHT/WEEKEND
mode can be programmed.
Ring Assignment -- used to set the Ring
Assignment to a Station, Hunt Group, VMIB
Announce, Net-Station, or Auto Fwd to VM.
- To assign a call to a station, the delay value
must be entered. If delay value is set, the call
will begin to ring after delay time has expired.
- To receive incoming calls instantly, delay
value should be set to 0. (Attendant Station
100 is assigned with delay of 0.)
- To delete a programmed CO ring
assignment, press the [SPEED] button instead
of entering a delay value.
PGM 144 + FLEX
1-5 + Destination
Type (1-5) + number
or range (based on
destination type) +
[HOLD/SAVE].
VALUES --
FLEX 1 = Day
FLEX 2 = Night
FLEX 3 = Weekend
FLEX 4 = Lunch
FLEX 5 = On-demand
Destination Type:
1 = Station Range + Delay (0-9)
2 = Hunt Group (620-629)
3 = VMIB (VMID MSG # 00-70)
4 = Net-Sta #
5 = Auto Fwd to VM (VM Sta #)
CO Ring Assignment Display -- used to check
ring assignment destination of a CO line for
each Day/Night Ring Mode.
- If CO Calls are assigned to the station during
Day or Night Mode, the delay value can be
viewed (ex., value 100(1) means station 100
will receive a ring with a delay value of 1).
PGM 145 + FLEX 1 VALUES --
FLEX 1 = Day
FLEX 2 = Night
FLEX 3 = Weekend
FLEX 4 = Lunch
FLEX 5 = On-demand
Release 3.5
June 2010