Technical data

Other Programming Tables 1-241
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
Tables
Mobile Extension (PGM 236)
Enter bin number which matches with station physical number and follow the specific procedure
as listed in the Table:
Maintain DID Name -- N/A
This value is used at the CLI display of an incoming DID CO call.
If the incoming DID call has CLI, it is displayed on the station LCD
only during ringing time. If this value is set to ON, CLI display is
maintained when the call is answered.
PGM 200 + FLEX 11
+ Value +
[HOLD/SAVE]
VALUES --
PC Application Destination Station -- N/A
This value is used the valid destination station about PC
application connection request.
PGM 200 + FLEX 12
+ Value +
[HOLD/SAVE]
VALUES --
Assign CO Group -- used to assign the CO group when
a call routes to a mobile extension.
PGM 236 + FLEX 2 + CO
Group + [HOLD/SAVE]
VALUES --
group number
Assign Telephone Number -- used to enter the
telephone number of a mobile extension when this
feature is activated.
PGM 236 + FLEX 3 +
Mobile Number (up to 24
digits) + [HOLD/SAVE]
VALUES --
telephone number
Assign CLI Number -- used to enter the CLI number of
a mobile extension
PGM 236 + FLEX 4 + CLI
number (up to 16 digits) +
[HOLD/SAVE]
VALUES --
CLI number
Voice Message Notification to Mobile (future feature) -- PGM 236 + FLEX 6 + 0
(Off) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Usage -- if feature is set to ON and if there is a voice
message left for the station, the system sends SMS
notification to its Mobile Extension. (Only possible
when PSTN SMS is supported -- SMS is not supported
at this time.
PGM 236 + FLEX 7 + 0
(Off) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Release 3.5
June 2010