Technical data

Other Programming Tables 1-240
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
ISDN System Base Program
System ISDN Attributes (PGM 200)
DCOB Type -- N/A
Select the DCO CO line service type. According to the
country, DCO CO service type is different.
PGM 187 + FLEX 4 + 2
Value (1 digit) +
[HOLD/SAVE]
0 = Cyprus
1 = Italy
2 = Korea
Send S-Block Command -- if value is set to ON, the DCO
line send S-Block command to PX.
PGM 187 + FLEX 5 + 0
Value (1 digit) +
[HOLD/SAVE]
VALUES --
0 = Off
1 = On
Advice of Charge -- N/A
The AOC is the call cost information service that is provided by
public ISDN. According to the country, the standard of AOC type is
different. This value is used to set the AOC type.
PGM 200 + FLEX 1
+ VALUE +
[HOLD/SAVE]
VALUES --
0-6
CO ATD Code -- used when ISDN DID call incoming and outgoing
case.
If the received DID digit is matched this value, then the call is
routed to attendant station.
If PGM 114 - FLEX 5 is set to CO ATD, and the station is making
an outgoing CO call, then this value is used as the outgoing
station's CLI data.
PGM 200 + FLEX 2
+ Value +
[HOLD/SAVE]
VALUES --
max 2 digits
Reserved PGM 200 + FLEX 3 Reserved
Reserved PGM 200 + FLEX 4 Reserved
Reserved PGM 200 + FLEX 5 Reserved
CLI Print -- N/A
This value is used to execute the CLI print about the incoming CO
call. If this value is set to ON, the CLI of the incoming CO call will
be sent to serial/MODEM/LAN port.
PGM 200 + FLEX 6
+ Value +
[HOLD/SAVE]
VALUES --
International Access Code -- N/A
This value is used to modify the received CLI of the international
incoming CO call. If this value is set, and if station receives the
international incoming CO call, then this value is inserted in front
of the CLI.
PGM 200 + FLEX 7
+ Value +
[HOLD/SAVE]
VALUES --
Reserved PGM 200 + FLEX 8 Reserved
Release 3.5
June 2010