Technical data

Other Programming Tables 1-239
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
DCOB Attribute 2 (PGM 187)
R2 OUT Digit Timer -- if outgoing dial is not
performed within timer setting, the R2 outgoing
call is failed.
PGM 186 + FLEX 13 + 05
Value (2 digits) +
[HOLD/SAVE]
VALUES --
Range = 01-50
R2 Error Prompt Usage -- if an R2 outgoing call is
made and the ERROR signal is received (usually
there's an error in the traffic etc.), the caller hears
the error announcement to call again. If there's no
available VMIB, the system error tone is heard.
PGM 186 + FLEX 14 + 0 Value
+ [HOLD/SAVE]
VALUES --
0 = Off
1 = On
R2 Busy Prompt Usage -- if an R2 outgoing call is
made and the BUSY signal is received (the
destination is busy), the caller hears the busy
announcement. If there's no available VMIB, the
system busy tone is heard.
PGM 186 + FLEX 15 + 0 Value
+ [HOLD/SAVE]
VALUES --
0 = Off
1 = On
R2 Announce Prompt Usage -- if an R2 outgoing
call is made and the ANNOUNCE signal is
received (if the destination number is invalid etc.),
the caller hears the error announcement to call
again. If there's no available VMIB, the system
error tone is heard.
PGM 186 + FLEX 16 + 0 Value
+ [HOLD/SAVE]
VALUES --
0 = Off
1 = On
DCO Gain -- this gain is used to generate R2MFC
tone via voice path.
PGM 186 + FLEX 17 + 32
Value + [HOLD/SAVE]
VALUES --
01-63
Incoming Digit Type -- select the incoming digit
information signaling type of DCO.
PGM 187 + FLEX 1 + CO
Line Range + 2 (1 digit) +
[HOLD/SAVE]
VALUES --
0 = Pulse
1 = DTMF
2 = R2MFC
Outgoing Digit Type -- select the outgoing digit information
signaling type of DCO.
PGM 187 + FLEX 2 + CO
Line Range + 2 (1 digit) +
[HOLD/SAVE]
VALUES --
0 = Pulse
1 = DTMF
2 = R2MFC
No Of CLI Digits -- PGM 187 + FLEX 3 + CO
Line Range + 10 Value (2
digits) + [HOLD/SAVE]
VALUES --
Range = 01-15
Release 3.5
June 2010