Technical data

Other Programming Tables 1-236
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
System Timers 2 (PGM 181)
VM Outbound Retry Count -- if value is set to 0, no
retries will be made after the initial attempt when a
new message is received.
PGM 180 + FLEX 23 + 2
(Value) + [HOLD/SAVE]
VALUES --
Range = 0-9
2nd Call Alert Timer -- PGM 180 + FLEX 24 + Value
(secs) + [HOLD/SAVE]
VALUES --
Range = 000-255
DID/DISA No Answer Timer -- used for DID or DISA call
routing. If the station doesn't answer a DID/DISA call
within the time allowed, the call will be routed to the
assigned PGM 167 - FLEX 3 value.
PGM 181 + FLEX 2 + 25
seconds (2 digits) +
[HOLD/SAVE]
VALUES --
Range = 00-99
ICM Dial Tone Timer -- designates the time when an
off-hook station will play the intercom dial tone before an
error tone is provided.
PGM 181 + FLEX 7 + 10
Seconds (2 digits) +
[HOLD/SAVE]
VALUES --
Range = 01-20
MSG Wait Reminder Tone Timer -- designates the amount
of time between repeated message waiting reminder
tones to the station.
PGM 181 + FLEX 9 + 00
Seconds (2 digits) +
[HOLD/SAVE]
VALUES --
Range = 00-60
Pause Timer -- used for speed dial or Last Number Redial;
the SBX IP system sends the dialed digits to the outgoing
CO line, after the designated time.
PGM 181 + FLEX 11 + 3
Seconds (1 digit) +
[HOLD/SAVE]
VALUES --
Range = 1-9
3 Soft Auto Release Timer (3 soft key DKTU only) -- while
in the 3 soft button menu, if no digits are pressed within the
designated time, the DKTU will return to an idle state.
PGM 181 + FLEX 14 + 05
Seconds (2 digits) +
[HOLD/SAVE]
VALUES --
Range = 01-30
VM Pause Timer -- this is the amount of time a voice mail
port will remain idle before taking another call.
PGM 181 + FLEX 15 + 30
Value (100 msec, 2 digits)
+ [HOLD/SAVE
VALUES --
Range = 01-99
Transit Connect Timer -- designates the amount of time
before the master system sends a connect message to the
slave system when using a pulse analog trunk.
PGM 181 + FLEX 16 + 04
Value (2 digits) +
[HOLD/SAVE]
VALUES --
Range = 01-30
Release 3.5
June 2010