Technical data

Other Programming Tables 1-233
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
Print Caller Number -- if value is set to ON, the
caller number is printed when receiving an
incoming SMDR call.
PGM 177 + FLEX 16 + 0
(Off) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
SMDR Interface Service -- N/A
This is for specific application program for
SMDR data. If this is ON, SMDR data is saved
and sent when there is 'SMDR data request'
from application software. In this case normal
Off-line SMDR data cannot be saved nor
printed. It means that if this admin is ON, then
Offline SMDR function can not be used.
PGM 177 + FLEX 19 n/a
I-SMDR Connection Type -- determines port to
be used for printer when SMDR interface
service is set. SMDR Interface is served through
LAN or SIO.
PGM 177 + FLEX 20 + 0
(SIO) + [HOLD/SAVE]
VALUES --
0 = SIO
1 = LAN
I-SMDR Author Index -- this program
determines the port type to be used for SMDR
interface service. SMDR Interface is served
through LAN or SIO.
PGM 177 + FLEX 21 + 0
(Off) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Release 3.5
June 2010