Technical data

Other Programming Tables 1-232
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
SMDR Dial Digit Hidden -- if value is set to a
non-zero value, the printed digits from right or
left will be replaced with a '*' symbol up to the
designated value. The direction of right or left
can be set at PGM 177 - FLEX 13.
PGM 177 + FLEX 8 + 0
Value + [HOLD/SAVE]
VALUES --
Range = 0-9
SMDR Currency Unit -- for easy identification of
call costs, the currency unit can be entered with
3 alphabetic characters to be printed in front of
call charge amount.
PGM 177 + FLEX 9 + Value
(see Map on page D-50) +
[HOLD/SAVE]
VALUES --
3 characters
SMDR Cost Per Unit Pulse -- N/A
This is the call cost per a cost metering pulse
which is sent from the Central Office.
PGM 177 + FLEX 10 VALUES --
n/a
SMDR Fraction -- N/A
This value means the decimal position point of
the cost per unit pulse. In case the cost is 10.25
$ per a pulse, then 'SMDR Cost Per Unit Pulse'
should be set as 1025 and 'SMDR Fraction'
should be set '2' for there are 2 digits uner the
point of 10.25 $.
PGM 177 + FLEX 11 VALUES --
n/a
SMDR Start Timer -- if value is set to a non-zero
value, only the outgoing CO call lasting for more
than this time value is served SDMR.
PGM 177 + FLEX 12 + 000
Value + [HOLD/SAVE]
VALUES --
Range = 000-250
(seconds)
SMDR Hidden Digit -- if value is set to RIGHT,
SDMR digit hiding is executed in the right-to-left
direction (ex., dialed number "1234567890",
would be shown as "12345*****". If value is set
to LEFT, SDMR digit hiding is executed to
left-to-right direction, (ex., dialed number
"1234567890", would be shown as "*****67890".
PGM 177 + FLEX 13 + 1
(Right) + [HOLD/SAVE]
VALUES --
0 = Left
1 = Right
SMDR Long Distance Codes -- a long distance
call is defined as a call that satisfies the
condition of PGM 177 - FLEX 4, or PGM 177 -
FLEX 14.
PGM 177 + FLEX 14 + FLEX
1 (Value) + 1 (Up to 2 digits,
Range = *, #, 0-99) +
[HOLD/SAVE]
VALUES --
Default = 0
max. 5 SMDR long
distance codes
Range = FLEX 1-5
MSN Print on SMDR -- if value is set to ON, the
MSN number is printed instead of the Station
number when an outgoing MSN call is made.
PGM 177 + FLEX 15 + 0
(Off) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Release 3.5
June 2010