Technical data

Other Programming Tables 1-230
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
PBX Access Code (PGM 172)
Print Port Selection (PGM 175)
ICM Ring Back Tone (RBT) -- to assign an external
ICM ring back tone, set the SLT Station number of
the SLT port.
PGM 171 + FLEX 6 + SLT
MOH (Range 0-5) +
[HOLD/SAVE]
0 = Not Assigned (default)
VALUES --
1 = SLT MOH 1
2 = SLT MOH 2
3 = SLT MOH 3
4 = SLT MOH 4
5 = SLT MOH 5
CO Ring Back Tone (RBT) -- to assign external DID
ring back tone, set the SLT station number of the
SLT port.
PGM 171 + FLEX 7 + SLT
MOH (Range 0-5) +
[HOLD/SAVE]
0 = Not Assigned (default)
VALUES --
1 = SLT MOH 1
2 = SLT MOH 2
3 = SLT MOH 3
4 = SLT MOH 4
5 = SLT MOH 5
PBX Access Code -- a maximum 4 PABX Access
Codes can be assigned. A PABX Access Code is
a 1 or 2-digit number.
PGM 172 + FLEX 1
(FLEX 1-4) + 9 (1 or 2
digits) + [HOLD/SAVE]
VALUES --
Default = not assigned
Range = *,#,1-99
Off-line SMDR / Statistics Print -- off-line SMDR data can
be printed through this port.
PGM 175 + FLEX 1 + 01
(Value)+ [HOLD/SAVE]
VALUES --
Range = 01-11
Admin Data -- when PGM 451 is used, the Admin data
can be printed through this port.
PGM 175 + FLEX 2 + 01
(Value) + [HOLD/SAVE]
VALUES --
Range = 01-11
SMDI Print -- SMDI data can be printed through this port. PGM 175 + FLEX 4 + 01
(Value) + [HOLD/SAVE]
VALUES --
Range = 01-11
Call Information -- call information data can be printed
through this port.
PGM 175 + FLEX 5 + 01
(Value) + [HOLD/SAVE]
VALUES --
Range = 01-11
Info / On-line SMDR -- on-line SMDR data can be printed
through this port.
PGM 175 + FLEX 6 + 01
(Value) + [HOLD/SAVE]
VALUES --
Range = 01-11
Trace -- trace data can be printed through this port. PGM 175 + FLEX 7 + 01
(Value) + [HOLD/SAVE]
VALUES --
Range = 01-11
Debug -- debug data can be printed through this port. PGM 175 + FLEX 8 + 01
(Value) + [HOLD/SAVE]
VALUES --
Range = 01-11
Release 3.5
June 2010