Technical data

Other Programming Tables 1-229
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
DID/DISA Destination (PGM 167)
Music Assignment (PGM 171)
Reroute Busy Destination -- when a DID/DISA call is
rerouted by the no answer forward/CCR and if the
rerouted destination is busy, calls will follow the Reroute
Busy Destination.
PGM 167 + FLEX 6 +
FLEX 1 (VALUES) + 0
(Off) + [HOLD/SAVE]
FLEX 1 = Tone
FLEX 2 = ATD
FLEX 3 = Hunt
(Not supported
at E1 CO line.)
Reroute Error Destination -- when a DID/DISA call is
rerouted by the no answer forward/CCR state and if the
rerouted destination returns an error, calls will follow the
Reroute Error Destination.
PGM 167 + FLEX 7 +
FLEX 1 + 0 (Off) +
[HOLD/SAVE]
FLEX 1 = Tone
FLEX 2 = ATD
FLEX 3 = Hunt
(Not supported
at E1 CO line.)
Reroute No Answer Destination -- if No Answer
Destination is busy, the call will be rerouted to Reroute No
Answer Destination (Tone / Attendant / Hunt).
PGM 167 + FLEX 8 +
FLEX 1 + 0 (Off) +
[HOLD/SAVE]
FLEX 1 = Tone
FLEX 2 = ATD
FLEX 3 = Hunt
(Not supported
at E1 CO line.)
BGM Type -- Background Music type. PGM 171 + FLEX 1 + 1
(VALUE) + [HOLD/SAVE]
VALUES --
0 = not assigned
1 = Int. Music
2 = External Music
3 = n/a
4-8 = SLT MOH 1-5
Assign SLT MOH -- to assign an SLT Music On Hold,
set the value and match the SLT station number for
the SLT port.
PGM 171 + FLEX 4 +
FLEX (Range: FLEX 1-5)
+ SLT Station Number +
[HOLD/SAVE]
VALUES --
FLEX 1= SLT MOH 1
FLEX 2= SLT MOH 2
FLEX 3= SLT MOH 3
FLEX 4= SLT MOH 4
FLEX 5= SLT MOH 5
Dial Tone Source -- to assign an external dial tone,
set the SLT station number of the SLT port.
PGM 171 + FLEX 5 + SLT
MOH (Range 0-5) +
[HOLD/SAVE]
0 = Not Assigned (default)
VALUES --
1 = SLT MOH 1
2 = SLT MOH 2
3 = SLT MOH 3
4 = SLT MOH 4
5 = SLT MOH 5
Release 3.5
June 2010