Technical data

Other Programming Tables 1-223
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
ISDN Enblock Send -- if value is set to ON,
Enblock Sending Mode is applied to outgoing
CO calls.
It is also applied to VOIP CO lines.
PGM 143 + FLEX 6 + 0
(OFF) + [HOLD/SAVE]
VALUES --
0 = Off, Overlap Sending
Mode
1 = On, Enblock
Sending Mode
Numbering Plan ID -- used for the Numbering
Plan ID of ISDN calls and the calling party
number (refer to VALUES).
PGM 143 + FLEX 8 +
FLEX1 (FLEX 1=Calling,
FLEX 2=Called) + 0
(unknown) +
[HOLD/SAVE]
VALUES -
0 = unknown
1 = ISDN / Telephony
2 = not used
3 = DATA
4 = TELEX
5 = NOT USED
6 = National Std
7 = Private
ISDN Call Deflection / Rerouting -- if value is set
to ENABLE, the ISDN call deflection or rerouting
service is available.
PGM 143 + FLEX 9 + 0
(No Call Deflection) +
[HOLD/SAVE]
VALUES --
0 = Disable
1 = Enable
ISDN 1 Digit Remove -- PGM 143 + FLEX 10 + 0
(OFF) + [HOLD/SAVE]
VALUE -
0 = Off
1 = On
ISDN Call Proc. Inband Msg (Italy only) -- N/A
If value is set to ON, Inband info in call
proceeding is available.
PGM 143 + FLEX 11 + 0
(OFF) + [HOLD/SAVE]
VALUE -
0 = Off
1 = On
CLI Type -- if value is set to 0, the CLI is Normal
(refer to PGM 200/PGM 114).
If value is set to 1 or 2, the CLI is Long CLI
(Station Long CLI 1 or 2).
PGM 143 + FLEX 12 + 0
(Normal) + [HOLD/SAVE]
VALUES --
0 = Normal
1 = Long CLI 1
2 = Long CLI 2
Reserved PGM 143 + FLEX 13 -
Screening -- this function is related to ISDN
ETSI SPEC. When ISDN outgoing call is
established, ISDN Setup message has a CLI
field with a SCREENING INDICATOR element.
PGM 143 + FLEX 14 + 0
(VALUE) + [HOLD/SAVE]
VALUES -
0 = User provided, No S
1 = User provided, Pass
2 = User provided, Fail
3 = Network provided
Prefix Table Index -- N/A
Dialing Service by prefix code.
PGM 143 + FLEX 16 (Ukraine - not used)
Release 3.5
June 2010