Technical data

Other Programming Tables 1-220
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
Display Station Number By COS / By CO Group (PGM 130-131)
CO Line (PGM 140-146)
CO Service Type (PGM 140)
CO Line Attributes 1 (PGM 141)
Enter appropriate CO line range (01-12) and follow the specific procedure shown in the Table.
Display Station Number by COS -- display Station
Number by COS.
Show Station by assigned
Day COS:
PGM 130 + FLEX 1 + 1
(COS, Range=1-9)
Show Station by assigned
Night COS:
PGM 130 + FLEX 2 + 1
(COS, Range=1-9)
VALUES --
FLEX 1 = DAY
FLEX 2 = Night
NAVIGATION --
Next page: Volume
Up/Down Key
Display Station Number by CO Access Group --
station numbers that access certain CO Line Groups
could be checked. The LCD shows stations that are
assigned to access CO Line Group 1.
PGM 131 + 01 (CO Line
Group, Range = 01-24)
NAVIGATION --
Next page: Volume
Up/Down Key
Reserved -- N/A PGM 140 + FLEX 1 + 2 +
[HOLD/SAVE]
VALUES --
Reserved -- N/A PGM 140 + FLEX 1 + 4 +
[HOLD/SAVE]
VALUES --
CO Line Assign -- designates the CO Line
type.
PGM 141 + FLEX 4 + 0
(Pol) + [HOLD/SAVE]
VALUES --
0 = Loop Start (Loop)
1 = Polarity Reverse (Pol)
CO Line Type -- designates the CO Line type. PGM 141 + FLEX 5 + 0
(CO) + [HOLD/SAVE]
VALUES --
0 = CO
1 = PBX
CO Line Signal Type -- designates the CO Line
signaling type.
PGM 141 + FLEX 6 + 1
(DTMF) + [HOLD/SAVE]
VALUES --
0 = PULSE
1 = DTMF
Release 3.5
June 2010