Technical data

Other Programming Tables 1-218
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
SMDR Account Group (PGM 124)
Enter appropriate station range and follow specific procedure:
ISDN COLR -- if value is set to ON, the connected
party's CLI information is restricted by the PX.
PGM 114 + FLEX 15 + 0
(Off) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
CLI Type -- designates CLI type: Station CLI Long
(max. 12), or Short for a station with a normal CLI
(max. 4).
PGM 114 + FLEX 18 + 0
(Short) + [HOLD/SAVE]
VALUES --
0 = Short
1 = Long
Long Station CLI -- if outgoing CLI is activated and
CLI type is EXT (Station), this value is used as the
outgoing CLI.
PGM 114 + FLEX 19 +
Value (max. 12 digits) +
[HOLD/SAVE]
VALUES --
Range=0-9
MSN Wait -- N/A
If this value is set to ON, a busy station can receive
a call waiting signal when another MSN call is
received.
PGM 114 + FLEX 20 VALUES --
0 = Off
1 = On
Long CLI1 -- if CLI type of outgoing CO line is set
to 1, Long CLI 1 is sent.
- See PGM 143 - F12 (CLI Type)
PGM 114 + FLEX 21+
Value (max. 16 digits) +
[HOLD/SAVE]
VALUES --
Range = 0-9
Long CLI2 -- if CLI type of an outgoing CO line is
set to 2, Long CLI 2 is sent.
PGM 114 + FLEX 22 +
Value (max. 16 digits) +
[HOLD/SAVE]
VALUES --
Range = 0-9
Collect Call Blocking -- blocks collect calls if set to
ON.
PGM 114 + FLEX 23 + 1
(On) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
SMDR Account Group -- stations can be assigned as a
member of a call account group on SMDR. A station belongs
to only one group.
PGM 124 + 01 (Account
Group, 00-23) +
[HOLD/SAVE]
00 = not
assigned
Release 3.5
June 2010