Technical data

Other Programming Tables 1-217
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
Station Attributes 4 (PGM 114)
Enter appropriate station range and follow specific procedure:
Connected Line Identification Presentation (COLP)
LCD Display -- if value is set to ON, the connected
party CLI is displayed on the station’s LCD.
PGM 114 + FLEX 2 + 0
(Off) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
CLI / Redirect Display (RED) -- if value is set to
RED, the redirected CLI is displayed. Otherwise,
the original CLI is displayed when using
networking.
PGM 114 + FLEX 3 + 0
(CLI) + [HOLD/SAVE]
VALUES --
0 = CLI
1 = RED
EXT or CO ATD -- if value is set to ATD, CO ATD
code is used for outgoing CLI information.
Otherwise, the station number is used as CLI
information.
PGM 114 + FLEX 5 + 0
(EXT) + [HOLD/SAVE]
VALUES --
0 = EXT
1 = ATD (PGM 200)
Keypad Facility -- if value is set to KEYPAD, ISDN
Station sends digits in the Keypad Facility after a
call is connected. Otherwise DTMF is used.
PGM 114 + FLEX 6 + 0
(DTMF) + [HOLD/SAVE]
VALUES --
0 = DTMF
1 = Keypad
Long/Short -- if value is set to LONG, the ISDN
Station acts in the LONG passive mode.
PGM 114 + FLEX 7 + 0
(Short) + [HOLD/SAVE]
VALUES --
0 = Short
1 = Long
CPN Type -- designates the Called Party Number
(CPN) type. If value is set to 0, all SO stations of the
S port will be ringing.
PGM 114 + FLEX 8 + 0
(Do not send CPN to
S0) + [HOLD/SAVE]
VALUES --
0 = Do not send CPN to
S0.
1 = Send Station
number as CPN
2 = Bypass CPN from
the Network.
SO Sub Address -- indicates how the sub-address
is used in the SETUP message. If value is set to 0,
the station sub-address not used. If set to 1, the
sub-address is filled in the CPN field of the SETUP
message. Otherwise, the sub-address is filled in
the CPSN (Called Party Sub-address Number)
field of the SETUP message.
PGM 114 + FLEX 9 + 0
(Station sub-address
not used) +
[HOLD/SAVE]
VALUES --
0 = Station sub-address
not used.
1 = Station sub-address
IN CPN
2 = Station sub-address
IN CPSN
Progress Indication -- if value is set to ON, the
Progress Indicator shows non-ISDN devices.
PGM 114 + FLEX 13 + 0
(Off)+ [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Release 3.5
June 2010