Technical data

Other Programming Tables 1-216
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
Station Attributes 3 (PGM 113)
Enter appropriate station range and follow specific procedure:
Block Back Call for SLT -- if value is set to ON, SLT
recalling is blocked after pressing the [FLASH] button.
PGM 112 + FLEX 18 + 0
(OFF) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
I-Time RST (Incoming CO call time restriction) -- if
value is set to ON, the conversation time of an
incoming CO call is limited. After CO Call Restriction
Timer expires, the call is forced to disconnect.
PGM 112 + FLEX 19 + 0
(OFF) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Reserved PGM 112 + FLEX 21 -
Door Open -- if value is set to ON, the programmed
station can open a designated door by dialing the
assigned Door Open Code.
PGM 112 + FLEX 22 + 1
(Enable) + [HOLD/SAVE]
VALUES --
0 = Disable
1 = Enable
Group Listening -- if value is set to ON, the station user can
use group listening, while on a handset call by pressing the
[SPEAKER] button; other people in the vicinity will be able
to hear the conversation through the speaker.
NOTE: Only the voice of the user on the handset will project
their voice to the user on the other end of the call.
PGM 113 + FLEX 3 + 0
(Disable) + [HOLD/SAVE]
VALUES --
0 = Disable
1 = Enable
SMDR Hidden Dialed Digits -- if value is set to ON, the
dialed number of a CO Call will on appear on the SMDR
record.
PGM 113 + FLEX 5 + 0
(Disable) + [HOLD/SAVE]
VALUES --
0 = Disable
1 = Enable
Alarm Attribute -- if value is set to ON, the station will be able
to receive alarm signals.
PGM 113 + FLEX 10 + 0
(Off) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Mute Ring Service -- if value is set to ON, the station can get
muted ring.
PGM 113 + FLEX 11 + 1
(On) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Call Coverage -- the user can enable or disable the Call
Coverage function by pressing TRANS/PGM + 451.
PGM 113 + FLEX 18 + 0
(Off) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Back Light -- a value of OFF means that the Back Light is
never illuminated. A value of BUSY means that the Back
Light is illuminated when the phone is off hook. A value of
ON means that the Back Light is always illuminated.
PGM 113 + FLEX 20 + 0
(Off) + [HOLD/SAVE]
VALUES --
0 = Off
1 = Busy
2 = On
Release 3.5
June 2010