Technical data

Other Programming Tables 1-215
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
Station Attributes 2 (PGM 112)
Enter appropriate station range and follow specific procedure:
CO Warning Tone -- used to restrict outgoing call time.
If this value is set to ON, the station user will receive a
warning tone during a CO call after the timer expires
PGM 112 + FLEX 1 + 0
(Off) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
PGM 180 - FLEX
22
Individual CO Line Access -- if value is set to ON, the
Station User can access an individual CO line by
dialing the individual CO access code.
PGM 112 + FLEX 4 + 1
(Enable) + [HOLD/SAVE]
VALUES --
0 = Disable
1 = Enable
PGM 107 - FLEX 8
Prepaid Call -- if value is set to ON, the station user can
use the Prepaid Call feature.
PGM 112 + FLEX 8 + 0
(Off) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Fax Mode -- if value is set to ON, a single ring is
provided and Attendant recall is not operated.
PGM 112 + FLEX 11 + 0
(Off) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
UCD Group Service -- used when a station receives a
DID/DISA call. If value is set to ON, the UCD Group the
station belongs to will receive the incoming call. If this
value is set to OFF, the station receives the incoming
call directly whether the station is busy or not.
PGM 112 + FLEX 13 + 0
(Off) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Ring Group Service -- used when a station in a Ring
Group receives a DID/DISA call. If value is set to ON,
the Ring Group the station belongs to will receive the
incoming call. If this value is set to OFF, the station
receives the incoming call directly.
PGM 112 + FLEX 14 + 0
(Off) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Line Length (SAF only) -- N/A
This feature is used to distinguish the line length when
the distance between the stations and the station
boards is too variable.
PGM 112 + FLEX 16 + 0
(Short) + [HOLD/SAVE]
VALUES --
0 = Short: 0 km
1 = Long: 0-3 km
2 = Far: 3-7.5 km
Message Scroll Speed (Korea only) -- N/A
The scroll speed of SMS or broadcasting notice
message.
PGM 112 + FLEX 17 + 3
(Value) + [HOLD/SAVE]
VALUES --
0 = Fastest
1-6 = Slower by no.
7 = Slowest
Release 3.5
June 2010