Technical data

Traffic Analysis 1-207
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
• This feature can only be accessed from the Main Attendant Station (refer to the Attendant
Programming Menu Table in the "Attendant Programming Codes" on page D-44).
• Available time measurement types are:
- Today's peak time
- Yesterday's peak time
- Last hour
- Yesterday's total
- Today's total
ADMIN PROGRAMMING
Select Print Port
OPERATION / SETUP
To print traffic reports from the Main Attendant Station (only):
1. Press [TRANS/PGM], then enter the following:
0121 = All Summary
0122 = All Summary - periodical
0124 through 0129 = individual reports
NOTE: Some individual reports may require the entry of a CO group number.
2. Select Measurement Time type.
3. Press [HOLD/SAVE] to generate the report.
To cancel printing of All Summary periodic report from the Main Attendant Station (only):
1. Press [TRANS/PGM].
2. Enter 0123.
3. Press [HOLD/SAVE] to cancel the report.
Traffic -- Traffic analysis data can be printed
through this port.
PGM 175 + FLEX 3 + Value
(01) + [HOLD/SAVE]
VALUES --
Range: 01-11
Default: COM1 (01)
01: COM1
02: COM2-MODU
03: TELNET 1
04: TELNET 2
05: TELNET 3
06-11: (n/a)
Release 3.5
June 2010