Technical data

Station Message Detail Recording (SMDR) 1-205
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
ADMIN PROGRAMMING
Enable SMDR Print
Enable Long Distance/ All Call Recorded
Enable Print Lost Call
OPERATION / SETUP
To print the lost call count of record from the Attendant station:
Press [TRANS/PGM], then enter 0117.
The printout of the record is sent to the computer connected to the SBX IP 320.
To clear the lost call count of records from the Attendant station:
Press [TRANS/PGM], then enter 0118.
The lost call count time is restarted.
SMDR Print Enable -- If this value is set to ON, SDMR data
can be printed in real time through the serial/MODEM/LAN
port.
PGM 177 + FLEX 2 + 0
(Off) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Long Distance/All Call Recorded (SMDR Record Call Type) --
if value is set to LD, only long distance outgoing CO calls will
be recorded in the SMDR. If this value is set to ALL, all
outgoing CO calls will be recorded by the SMDR.
A long distance call is defined as a call that satisfies the
condition of FLEX 4, or FLEX 14.
PGM 177 + FLEX 3 +
Value (1 LD) +
[HOLD/SAVE
VALUES -
0 = All Call
1 = LD
Print Lost Call -- if value is set to ON, lost calls are printed.
Lost calls are defined as calls that are unanswered.
PGM 177 + FLEX 6 + 0
(Off) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Release 3.5
June 2010