Technical data

Station Message Detail Recording (SMDR) 1-202
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
Enable ICM SMDR SAVE
Enable ICM SMDR PRINT
Set SLT DTMF RLS Timer
Access SMDR Local Code Table
ICM SMDR Save -- if value is set to ON, ICM call data is stored
in Off-line SMDR.
PGM 177 + FLEX 17 + 0
(Off) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
ICM SMDR Print -- if value is set to ON, ICM call data is printed
in On-line SMDR.
PGM 177 + FLEX 18 + 0
(Off) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
SLT DTMF Release Time -- when SLT makes an outgoing
call, the DTMF receiver will be released after the timer
expires.
PGM 181 + FLEX 13 +
Value (00 secs, 2 digits) +
[HOLD/SAVE]
VALUES --
Range = 00-60
(seconds)
Local Code Table -- a local call is defined as the
telephone number satisfies the condition of PGM
204. If telephone numbers match this table, the
SMDR is printed as a local call. A maximum of 16
SMDR local codes are available. The SMDR long
distance code can be up to a 5-digit number.
PGM 204 + bin number
(01-16) + local code
(max. 5 digits)
VALUES --
Default: SMDR long
distance code = none
Release 3.5
June 2010