Technical data

Rerouting 1-178
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
Push-to-Talk (PTT) - (Nomad IP Phones only)
Using the PTT button of the Nomad IP, the user can talk to members of an internal page zone.
CONDITIONS
• PTT follows the feature operation of internal call page, except the Page Timer isn't
applied.
• The range of internal page zone for PTT follows the internal page zone of each system
except conference page zone.
OPERATION / SETUP
To register internal page zone for PTT:
1. Press [TRANS/PGM], then 1#.
2. Enter the internal page zone for PTT.
If want to remove the assigned page zone, press 0 (zero).
3. Press [HOLD/SAVE].
To use PTT on the Nomad IP phone:
Press the PTT button of the Nomad IP, then talk to members of the designated internal
page zone assigned.
Paging ends when the PTT button is released.
Rerouting
Call Forward
A station user can forward calls to any station, Station Group, or VMIB in the system. There are
several types of Call Forwarding features:
- Unconditional - forwards calls to another destination no matter what the status of the
called station is (for example, on or off hook, busy, DND, no answer, etc.).
- Busy - forwards calls when the called station is busy (off hook/DND)
- No Answer - forwards calls when there is no answer at the called station (within the
preset time - see ADMIN PROGRAMMING).
- Busy/No Answer - forwards calls when the called station is busy (off hook/DND) or
when there is no answer (within the preset time - see ADMIN PROGRAMMING).
- Follow-me - Forward - specify an extension to which you want all your calls
automatically forwarded.
Release 3.5
June 2010