Technical data

Outgoing Call Access 1-167
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
OPERATION / SETUP
To use Last Number Redial at a digital phone:
1. Go off-hook.
2. Press [REDIAL].
-or-
1. Press [SPEED], then *.
2. Press [HOLD/SAVE] to dial the associated number.
To use a recently dialed number in the Last Number Directory (a digital phone w/display):
1. Press the display scroll buttons to find the phone number to be dialed.
2. When the number to be dialed appears, press [HOLD/SAVE] to dial the number.
To use Last Number Redial on an SLT phone:
1. Go off-hook.
2. Enter 552, or press [REDIAL].
Save Number Re-dealing (Digital Phones only)
Any dialed number can be saved temporarily and used at any time. This number is saved until
a new number is stored.
CONDITIONS
• When the used CO Line is busy, an idle CO Line in the group is accessed, and the saved
number is dialed.
• Saved numbers are saved even if the system is powered down (e.g., a power outage).
OPERATION / SETUP
To save a number in the Save Number Redial buffer:
1. Press [SPEED] twice, while on a conversation with an external party.
2. Replace the handset or go on-hook.
To dial a number from the Save Number Redial buffer:
1. Go off-hook.
2. Press [SPEED].
3. Press # button.
To erase the save number redial bin:
4. Access a CO line, dial a number, then press [SPEED] twice.
Release 3.5
June 2010