Technical data

Outgoing Call Access 1-166
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
OPERATION / SETUP
To program a {Redial} flex button on a digital phone:
1. Press [TRANS/PGM], then the designated flex button (24 or 8 button only).
2. Press [TRANS/PGM], then 97.
3. Press {HOLD/SAVE] to store the setting.
To use ACNR while receiving a busy/no answer indication on a CO Line:
1. Press [REDIAL], then disconnect.
2. The system automatically retries the call as per the ACNR retry counter.
3. When the called party answers, lift handset, or press [MUTE].
To cancel ACNR:
Press the flashing [REDIAL], lift handset, or press [MUTE] (while a CO Line is accessed).
Last Number Redialing (Digital and SLT Phones only)
The last dialed number on a CO Line can be stored (up to 32 digits) in the station's Last Number
Redial buffer. The user may then redial the last number on the system.
CONDITIONS
• Digital phones with a display can access a directory showing the ten last numbers dialed.
• When the used CO Line is busy, an idle CO Line in the group is accessed, and the last
dialed number is dialed.
• Duplicated phone numbers are included in the last dialed number directory.
• Last Number Redial overrides Auto-redial.
ADMIN PROGRAMMING
Enable Speed Dial Access
Enable CO Dial Tone Detect
Use PGM 160, then FLEX 6 … see page 1-30.
Speed Dial Access -- if value is set to ON, the station user can
use system speed dial to place a call.
PGM 112 + FLEX 9 + 1
(Enable) + [HOLD/SAVE]
VALUES --
0 = Disable
1 = Enable
Release 3.5
June 2010