Technical data

Outgoing Call Access 1-162
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
Set LCR Table Initialization
OPERATION / SETUP
To activate Internal LCR:
NOTE: An LCR Code is internal if the code is programmed as Internal or Both in the
Leading Digit Table.
1. Lift the handset, or press the [SPEAKER].
2. Enter the internal LCR Code.
To activate Loop LCR:
NOTE: An LCR is a COL LCR code if the code is set as both COL or BOTH in the Leading
Digit Table.
1. Dial the first accessible CO Line or CO Group access code (0 or 9), or press [Loop].
2. Enter COL LCR code
To activate Direct CO LCR:
An LCR is a COL LCR code if the code is set as both COL or BOTH in the Leading Digit
Table.
1. Enter a CO or CO Group Access code, or press a CO or CO Group button.
2. Enter COL LCR code.
DMT of Day Zone 1 -- this changes the index of
DMT value for day zone 1 to the new value.
PGM 223 + FLEX 1 +
Value + [HOLD/SAVE]
VALUES --
Range = 00-99 (6 digits)
Each pair (2 digits) is the
index to the DMT for
each time Zone 1/2/3.
DMT of Day Zone 2 -- this changes the index of
DMT value for day zone 2 to the new value.
PGM 223 + FLEX 2 +
Value + [HOLD/SAVE]
DMT of Day Zone 3 -- this changes the index of
DMT value for day zone 3 to the new value.
PGM 223 + FLEX 3 +
Value + [HOLD/SAVE]
CO Line Group -- this changes all CO Line Group
values of DMT entry to the new value.
PGM 223 + FLEX 4 +
Value + [HOLD/SAVE]
VALUES --
Range = 01-24 (2 digits)
ALT DMT Index -- this changes the all Alternative
DMT Index values of DMT entry to the new value.
PGM 223 + FLEX 5 +
Value + [HOLD/SAVE]
VALUES --
Range = 00-99 (2 digits)
Initialize All LCR -- this initializes all LCR Admin
data to the default value.
PGM 223 + FLEX 6 +
[HOLD/SAVE]
VALUES --
Release 3.5
June 2010