Technical data

Outgoing Call Access 1-161
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
Access Digit Modification Table
• The Digit Modification Table (DMT) is used to convert the dialed digit and seize the
outgoing CO line. In the SBX IP system, a maximum of 100 DMT entries can be
programmed.
• Enter the appropriate VALUE (DMT Table, Range = 00-99) and follow the specific
procedure as listed in the Table
Added Digit Stream -- this value is used to add digit
stream for user dialed digits (refer to Add Position -
PGM 222, FLEX4).
PGM 222 + FLEX 1 +
Value (20 digits, 0-9,*,#) +
[HOLD/SAVE]
VALUES --
[CALLBK] = Pause
[DND/FOR] = Dial
tone detection instead
of pause enter
[FLASH] = Station
Number Billing code
Removal Position -- used to set the removal
position for user dialed digits. Some digits will be
removed from the designated position up to this
amount.
PGM 222 + FLEX 2 + 01
Value (2 digits) +
[HOLD/SAVE]
VALUES --
Range = 01-12
Removal Position -- used to set the number of
removal digits.
PGM 222 + FLEX 3 + 01
Value (2 digits) +
[HOLD/SAVE]
VALUES --
Range = 01-12
Add Position -- used to set the add position for user
dialed digits. Some digits are added from the
designated position with Add Digit Stream.
PGM 222 + FLEX 4 + 01
Value (2 digits) +
[HOLD/SAVE]
VALUES --
Range = 01-13
CO Line Group -- used when LCR calls secure the
outgoing CO line. The idle CO line within CO Line
Group of the determined value is seized for LCR
calls.
PGM 222 + FLEX 5 + 01
Value (2 digits) +
[HOLD/SAVE]
VALUES --
Range = 01-24
Alternative DMT Index -- used when LCR calls are
unable to seize an idle CO line within PGM 222 -
FLEX 5, the LCR call will seize an idle CO within
CO Line Group of this value DMT index.
PGM 222 + FLEX 6 +
Value (2 digits) +
[HOLD/SAVE]
VALUES --
Range = 00-99
Release 3.5
June 2010