Technical data

General Information 1-3
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
Programming Using the Keyset
All programming is done at one station (Station 100, Station Port #00, by default) using the
4024-00 Digital Key Telephone (DKT).
Additional programming stations may be assigned, but only one DKT can be active in the
programming mode at any one time.
Programming Mode -- when in programming mode, Station 100 does not operate as a
normal telephone, but instead works as a programming instrument with all of the buttons
redefined. The keys of the dial pad are used to enter the various data fields to enter
numerical information.
Flexible Buttons -- the 24 buttons located on the right side of the phone are used to
indicate a specific data field and to enter information.
Soft Buttons -- the 3 functional soft buttons are used to go BACK to a previous menu, to
DELETE data, or to SAVE data input.
Entering Programming Mode
To assign an Admin Password:
To enter programming mode:
1. Lift the Handset or press the speaker button on the Admin station.
2. Press the [TRANS/PGM] button and dial * #.
A confirmation tone will sound.
3. Enter the Admin password, if a password has been set; a confirmation tone sounds
indicating that the Station is in Admin Programming mode.
Admin (DKTU only) -- if value is set to
ON, the assigned station users can
program the Admin Database.
PGM 113 + FLEX 1 + 0
(Disable) + [HOLD/SAVE]
VALUES --
0 = Disable (default)
1 = Enable
(Default = Enable for Admin
Station at station port 1 only)
Admin Password -- an Admin password can be
assigned for entering Admin Programming
mode, as a security measure. To delete the
Admin password, press the [SPEED] button.
PGM 162 + Password (4
digits - *, #, 0-9) +
[HOLD/SAVE]
VALUES --
Default = not assigned
# = ignore received digit
* = bypass the digit
Release 3.5
June 2010