Technical data

Outgoing Call Access 1-151
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
Set CO Line Group
Enable Override 1st CO Line Group
OPERATION / SETUP
General Access
Enter one of the following:
• 9 to access the first idle line in their CO group.
• 8801 to access CO Line 001 if it is idle.
• 801 to access the first idle CO Line in CO Group 1.
To access a CO Line from a digital phone:
1. Go off-hook.
2. Press the appropriate CO Line, {POOL} button, or CO button.
-or-
Enter the individual CO Line Access Code, CO Group Access Code, or the first CO
Line Access Code from the accessible group.
To access a CO Line from an SLT:
1. Lift the handset.
2. Enter the individual CO Line, CO Group Access Code, or the first CO Line Access
Code from the accessible group.
To access a CO Line Group:
1. Lift the handset.
2. Press 8 for the CO Group.
3. Enter the CO Group number.
To assign the CO button:
CO Line Group -- each CO Line must be a member
of a CO Line Group; Groups may be assigned
according to the CO type and Class-Of-Service.
PGM 141 + FLEX 1 +
01 (CO Line Group) +
[HOLD/SAVE]
VALUES --
00-25
Group 00 = private group
Group 25 = not used group
Override 1st CO Line Group -- if value is set to ON, when there
is no available CO Line in the first CO Line Group, the system
can access the next accessible CO Line Group.
PGM 161 + FLEX 3 + 1
(On) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Release 3.5
June 2010