Technical data

ISDN Service 1-143
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
To initiate a call back:
1. Press [HOLD].
2. The system will secure an available CO line in the first accessible CO group and dial
the number.
To delete all CLI messages. at an Attendant station:
1. Press [TRANS/PGM], then enter 055.
2. Enter the station range, and press [HOLD].
To program the CLI as a SPEED BIN number:
1. When the Message Wait with the number you want to save as a SPEED BIN appears,
press [SPEED].
The display message changes to the station speed dial program.
2. Press a station speed bin number.
-or-
Press [HOLD/SAVE] to store the speed dial number.
CLI MESSAGE WAIT FEATURE SUMMARY
ADMIN PROGRAMMING
Set Call Type
Use PGM 143, then FLEX 3 … see page 1-137.
ENTER SPEED BIN NO(001)
CLI MSG USED
BUTTONS CLI ACTIONS
[VOL UP/DOWN] See next CLI message
[HOLD] Make a recall according to CLI message
[CALLBK] Toggle CLI message and SPEED Name
[SPEED] + Bin # + [CONF] Store CLI message in SPEED dial bin
[CONF] Delete current CLI message
[DND] Delete all CLI messages
At ATD STA: [TRANS/PGM]+055 Delete all CLI messages at ATD station
Release 3.5
June 2010