Technical data

ISDN Service 1-142
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
• If the CLI Number is programmed in the SPEED BIN No. Table with the "Name", and the
CLI Name Display feature is enabled, then the name will be displayed on the target
station. In addition, the user can press [CALLBK] to toggle between CLI number and
name.
• A user can use the "all CLI delete" feature to delete all CLI messages from his station
unless there is a voice mail message attached to one of them. The priority of Message
Wait deletion is: VMIB Message Wait, then CLI Message Wait, then VM Group Message
Wait
• If duplicate CLI message waits are left at a station (that is, repeated calls from the same
caller), the CLI duplicate counter will appear with the Message Wait, with the time of the
last message left the CLI message with the CLI duplicated counter (max 15) and the last
call received.
• If CLI Print is enabled, the incoming CLI can be printed to an RS-232C port.
• Also see:
- Message Wait and Call Back on page 1-64
- Message Wait Indicator LEDs on page 1-65
- Message Wait Indication (MWI) - SLT Feature on page 1-68.
- Network Message Waiting Indicator (MWI) on page A-11.
OPERATION / SETUP
To retrieve a CLI Message Wait:
1. Press [CALLBK].
The message contents (CLI number, date and time, the calling count from the same
caller) appears on the display. The DATE appears according to the format set in
ADMIN PROGRAMMING (for example, MM/DD or DD/MM). TIME is always displayed
in 24-hour format.
2. Use the Volume up/down buttons to display the previous/next message.
To delete the current CLI Message, and display the next one:
Press [CONF].
To delete all CLI messages:
1. Press [CALLBK].
2. Press [DND] and [HOLD].
03434507902
DATE TIME CNTxx
Release 3.5
June 2010