Technical data

Incoming Call Pickup 1-133
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
1. Press PGM140 and enter CO range.
2. Press Flex 2 (Sub Attributes).
3. Select Flex 1 - Flex 4 (Day, Night, Week-end, On-Demand).
4. Press Flex 1 for DISA Service and select 0 for Off or 1 for Off.
5. Press Hold/Save.
6. Press Flex 2 for VMIB Announcement.
7. Enter 00-70 for the VMIB Greeting Assignment.
8. Press Hold/Save to store the setting.
Assign DISA Account Code
Set DISA Retry Counter
Assign CO-to-CO COS
Use PGM 166 … see page 1-27.
Access Weekly Time Table
Use PGM 233 … see page 1-14.
Set DISA Restriction
DISA Account Code -- if value is set to ON, when the incoming CO
caller tries to access another CO Line by dialing a CO line access
code, the caller will be prompted to enter an authorization code.
This only applies when the CO Service type is DISA.
PGM 141 + FLEX 3 +
Value (On) +
[HOLD/SAVE]
VALUES --
0 = Off
1 = On
DISA Retry Counter -- when the DISA user fails to connect
with a station or access a feature, the DISA user can retry
other calls or features within the amount of times set on the
retry counter. If the DISA user cannot make a connection
within the designated counter amount, the call will be routed
according to the DID/DISA destination (PGM 167).
PGM 160 + FLEX 4 + 3
(Retry Counter) +
[HOLD/SAVE]
VALUES --
0-9
DISA Restriction -- if value is set to ON, the station is restricted
to receive the DISA incoming call.
PGM 114 + FLEX 10 + 0
(Off) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Release 3.5
June 2010