Technical data

Incoming Call Pickup 1-132
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
CONDITIONS
• You can use a voice mail announcement instead of the intercom dial tone on a DISA line.
• When the DISA Authorization Code is enabled:
- for a DISA Line, a DND warning tone (or voice mail) announcement is sounded,
guiding the user to enter the DISA Authorization Code, the dial tone then should be
heard.
- the Authorization Code should be entered to access an outgoing CO Line.
• When the DISA Authorization Code is matched with the:
- Authorization Code of the station, the user can access the CO Line depending on STA
COS & CO COS.
- Authorization Code of system, it is determined by CO to CO COS and CO COS.
• When the DISA Authorization Code is disabled, permission is determined by CO to CO
COS & CO COS.
• Each DISA Line may be assigned as full-time DISA or Night Mode Only.
- A DISA assigned for Night Mode operates as a normal CO Line during Day mode.
• Use # when saving the voice mail announcement number to have the CO Line drop after
the announcement is played.
ADMIN PROGRAMMING
Assign a CO Line Range to a DISA Line
DISA Service
(Sub Attributes - Normal CO)
PGM 140 + FLEX 2 (VALUE 1) +
FLEX 1 + VALUE 2
VALUE 1:
Flex 1 = Day
Flex 2 = Night
Flex 3 = Weekend
Flex 4 = On-Demand
VALUE 2:
1 = On
0 = Off
DISA VMIB Announcement
(Sub Attributes - Normal CO)
PGM 140 + FLEX 2 (VALUE 1) +
FLEX 2 + VALUE 2 (00-70)
VALUE 1:
Flex 1 = Day
Flex 2 = Night
Flex 3 = Weekend
Flex 4 = On-Demand
VALUE 2:
VMIB Message Number
00-70 (00:not assigned)
Release 3.5
June 2010