Technical data

Incoming Call Pickup 1-127
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
Flexible DID Table
A maximum of 1000 Flexible DID Table entries can be programmed, each has five attributes.
1. Press [TRANS/PGM] button and dial 231.
2. Press FLEX 1 (enter Value, FLEX 1 = Input, FLEX 2 = Initial, FLEX 3 = Delete).
3. Enter DID Conv Table number (Range = 000-999) and follow specific procedure:
DID Name -- used to save the
name of incoming DID calls, and
display incoming DID call
information at the Station LCD.
PGM 231 + FLEX 1 + DID
Conv Table (Value) + FLEX 1
+ Name (see Keyset Map on
D-50) + [HOLD/SAVE]
VALUES --
Range = 000-999
Day Destination -- used to set
destination when routing DID
calls during the day ring mode.
PGM 231 + FLEX 2 +
Destination Type (Range =
01-11) + [HOLD/SAVE]
VALUES --
Destination Type
1 = Station #
2 = Hunt #
3 = VMIB 00-70 (00, not assigned)
4 = VMIB 01-70 Drop (not assigned)
5 = Speed Bin (2000-2499)
6 = Internal Page (1-5)
7 = External Page
8 = All Page (1-2, INT / ALL)
9 = Net Number (Network Sta #)
10 = Conference Room (1-9)
11 = Station Voice Mailbox (Sta #)
Night Destination -- used to set
the destination, when routing
DID calls during night ring mode.
PGM 231 + FLEX 3 +
Destination Type (Range =
01-11) + [HOLD/SAVE
VALUES --
refer to VALUES in Day Destination
Weekend Destination -- used to
set destination when routing DID
calls during weekend ring mode.
PGM 231 + FLEX 4 +
Destination Type (Range =
01-11) + [HOLD/SAVE]
VALUES --
refer to VALUES in Day Destination
Release 3.5
June 2010