Manualshelf

Technical data

ManualsBrandsVertical ManualsphonesSBX IP 320
131132133134135136137138139140
Incoming Call Pickup 1-124
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
Program DISA and CCR, CO Service Type, and Set VM Message number
DISA CCR (use PGM 140)
1. Be sure CO Service Type is set to Normal.
2. Press [FLEX 1].
3. Be sure the DISA Service is set to ON.
4. Press [FLEX 2].
5. Set VMIB Message Number to 01 PGM 140, then press [FLEX 2].
DID CCR
1. Be sure CO Service Type is set to DID/MSN.
2. Press [FLEX 1].
3. Use at (PGM 146) to be sure the DID Digit Receive Number is set to 3.
4. Use PGM 143 to set DID Conversion Type as 2 (using Flexible DID Table).
5. Press [FLEX 4].
6. Set the Destination Type as 3 (VMIB).
7. Use PGM 231 to select Announcement Number 01 for the Flexible DID Table.
06) Internal Page -- if the CCR destination type is the Internal Page, the call can
page to the designated internal page zones.
01-10
07) External Page -- if the CCR destination type is the External Page, the call
can page to the designated external page zones.
1
08) All Call Page -- if the CCR destination type is the All Call Page, the call can
page to all page zones.
1: INT All Page 2: All
Page
09) Net Number -- If the CCR destination type is set to this value, the call will
be routed to the network.
Net Number
10) Conference Room -- if the CCR destination type is set to this value, the call
will be routed to the Conference room.
1-9
11) Station Voice Mailbox -- if the CCR destination type is set to this value, the
call will be routed to the station mailbox.
STA #
12) Company Directory Request -- if the CCR destination type is set to this
value, the call will be routed to the company directory.
Off (default)
13) Mailbox Owner -- if the CCR destination type is set to this value, the call will
be routed to the mailbox owner.
Flex 01-13
(unassigned)
14) Record System Prompt -- if the CCR destination type is set to this value,
the caller will be prompted to enter a system greeting number and password.
001-070 via Admin
01-70 via Remote
CCR DESTINATION DIGIT / TYPE VALUE
Release 3.5
June 2010