Technical data

Incoming Call Pickup 1-123
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
Set Flexible DID Table
Use PGM 231 … see page 1-125.
Set Destination Type
Use PGM 228, enter the appropriate ranges, then follow the specific procedure as listed:
- CCR Table Number (Range = 01-70)
- Bin Number (Range = FLEX 1-FLEX 13)
- Destination Type (Range = 01-14)
Unassigned Destinations -- PGM 228 + FLEX 1-10 VALUES --
Busy Destination -- if the caller
dialed a busy number, the call will
be routed to the Busy Destination
(Tone / Attendant / Hunt / VMIB).
PGM 228 + FLEX 11 +
FLEX 2 Value +
[HOLD/SAVE]
VALUES --
FLEX 1 = Tone
FLEX 2 = Attendant (Ring Assign)
FLEX 3 = Forward to Hunt Group
FLEX 4 = VMIB Announce (001-070 Adm)
Error/Time Out Destination -- if
the caller dialed an invalid
number, the call will be routed to
the Error Destination (Tone /
Attendant / Hunt / VMIB).
PGM 228 + FLEX 12 +
FLEX 2 Value +
[HOLD/SAVE]
VALUES --
FLEX 1 = Tone
FLEX 2 = Attendant (Ring Assign)
FLEX 3 = Forward to Hunt Group
FLEX 4 = VMIB Announce (001-070 Adm)
No Answer Destination -- if the
destination does not answer, the
call will be routed to the No
Answer Destination (Tone /
Attendant / Hunt / VMIB).
PGM 228 + FLEX 13 +
FLEX 2 Value +
[HOLD/SAVE]
VALUES --
FLEX 1 = Tone
FLEX 2 = Attendant (Ring Assign)
FLEX 3 = Forward to Hunt Group
FLEX 4 = VMIB Announce (001-070 Adm)
CCR DESTINATION DIGIT / TYPE VALUE
01) Station -- if the CCR destination type is the Station, the call will ring at the
designated Station.
Sta #
02) Hunt Group -- if the CCR destination type is the Hunt Group, the call will
ring at the designated member Station in the group.
Hunt #
03) VMIB Announce -- if the CCR destination type is the VMIB, the designated
VMIB announcement will be played to the caller.
Announce #
04) VMIB Announce and Drop -- if the CCR destination type is the VMIB DROP,
the designated VMIB announcement will be played to the caller and the call will
be disconnected after the VMIB announcement.
Announce #
05) System Speed -- if the CCR destination type is the System Speed, the call
is routed to the system speed telephone number.
2000-2499
Release 3.5
June 2010