Technical data

Incoming Call Pickup 1-121
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
• Each voice mail announcement must be assigned a value within the CCR table. Of the
system announcement (01) isn't assigned any value in the CCR table, the call will be
routed to the designated DID/DISA destination. See ADMIN PROGRAMMING.
• To set up the voice mail prompt option, see ADMIN PROGRAMMING.
• If there is no answer at a destination station and the DID/DISA No-Answer timer expires,
the call is routed to the designated No-Answer destination, and ignores the retry count
(see ADMIN PROGRAMMING).
ADMIN PROGRAMMING
Program Flexible DID Table
Use PGM 231 … see page 1-125.
Program DID Digit Conversion Table
Set DISA Retry Counter
Use PGM 160, then FLEX 4 … see page 1-130.
Set CCR Inter-digit Timer
Set Inter-digit Timer
Use PGM 181, then FLEX 8 … see page 1-147.
Set DID/DISA Destination
Use PGM 167 … see page 1-124.
DID Digit Receive No. -- value is used to count
received DID digit numbers for routing incoming
DID calls.
PGM 146 + FLEX 5 + 3
(Value) + [HOLD/SAVE]
VALUES --
2-4 digits
DID Digit Mask -- when DID Conversion Type
(PGM 143 - FLEX 4) is set to 0, the received DID
digits are converted by this value. (Ex., '1234' is
received when DID Digit Mask is set as '#8**,' the
digit is converted as '834').
PGM 146 + FLEX 6 +
Value (4 digits, Range =
0-9)+ [HOLD/SAVE]
VALUES --
Default = #***
# = ignore received digit
* = bypass the digit
CCR Inter-digit Timer -- used for the CCR inter-digit timer
in the DISA/DID CO line. In DID type 2, it is used for the DID
inter-digit timer.
PGM 180 + FLEX 15 +
030 (100ms, 3 digits)
+ [HOLD/SAVE]
VALUES --
Range = 000-255
Release 3.5
June 2010