Technical data

Hunt Groups 1-118
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
ADMIN PROGRAMMING
Set Circular/Terminal Group
Set Ring Group
Set UCD Group
Set Voicemail Group
Set NetVM Group
Hunt Group Name Assign -- used to establish a name for the
Hunt Group. When an incoming CO line call is established with
the Hunt Group, the Hunt Group name will display on the 1st
LCD field. When an intercom call is established with the Hunt
Group, the Hunt Group name will display on the 3rd LCD field.
PGM 191 + FLEX 18 +
Value + [HOLD/SAVE]
VALUES --
max. of 12
characters
Hunt Group Name Assign -- used to establish a name for the
Hunt Group. When an incoming CO line call is established with
the Hunt Group, the Hunt Group name will display on the 1st
LCD field. When an intercom call is established with the Hunt
Group, the Hunt Group name will display on the 3rd LCD field.
PGM 191 + FLEX 15 +
Value + [HOLD/SAVE]
VALUES --
max. of 12
characters
Hunt Group Name Assign -- used to establish a name for the
Hunt Group. When an incoming CO line call is established with
the Hunt Group, the Hunt Group name will display on the 1st
LCD field. When an intercom call is established with the Hunt
Group, the Hunt Group name will display on the 3rd LCD field.
PGM 191 + FLEX 23 +
Value + [HOLD/SAVE]
VALUES --
max. of 12
characters
Hunt Group Name Assign -- used to establish a name for the
Hunt Group. When an incoming CO line call is established with
the Hunt Group, the Hunt Group name will display on the 1st
LCD field. When an intercom call is established with the Hunt
Group, the Hunt Group name will display on the 3rd LCD field.
PGM 191 + FLEX 7 +
Value + [HOLD/SAVE]
VALUES --
max. of 12
characters
Hunt Group Name Assign -- used to establish a name for the
Hunt Group. When an incoming CO line call is established with
the Hunt Group, the Hunt Group name will display on the 1st
LCD field. When an intercom call is established with the Hunt
Group, the Hunt Group name will display on the 3rd LCD field.
PGM 191 + FLEX 1 +
Value + [HOLD/SAVE]
VALUES --
max. of 12
characters
Release 3.5
June 2010