Technical data

Hunt Groups 1-116
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
Voice Mail Hunt Groups (SLT only)
A Voice Mail Hunt Group must be assigned to analog lines only. When a call comes into a Voice
Mail group, the caller hears a list of choices. At that point, the call will be handled according to
the programmed options/destinations.
NOTE: Ring/Hunt Group Name is not supported for external voice mail groups.
ADMIN PROGRAMMING
Set Voice Mail Hunt Group Attributes
VOICE MAIL GROUP ATTRIBUTES
Wrap-up Timer -- is used to delay new calls to a
member of the Hunt Group that has just become idle.
PGM 191 + FLEX 1 + 002
seconds + [HOLD/SAVE]
VALUES --
Range = 000-999
Put Mail Index -- one of the voice mail dialing tables. PGM 191 + FLEX 2 + 1
Value + [HOLD/SAVE]
VALUES --
Range = 1-4
Get Mail Index -- one of the voice mail dialing tables. PGM 191 + FLEX 3 + 2
Value + [HOLD/SAVE]
VALUES --
Range = 1-4
Hunt Type -- used to set the hunt type for voice mail
members.
PGM 191 + FLEX 4 + 2
(Terminal) + [HOLD/SAVE]
VALUES --
1 = Circ
2 = Term
SMDI Port -- N/A
The Simplified Message Desk Interface (SMDI)
dictates the distribution of VM information
PGM 191 + FLEX 5 + SMDI
Port + [HOLD/SAVE]]
VALUES --
Range = 01-11
Overflow Timer -- if timer expires after a call is
received in the group, the call will be routed to the
overflow destination.
PGM 191 + FLEX 6 + 180
seconds + [HOLD/SAVE]
VALUES --
Range = 000-600
Overflow Destination -- calls to a station in the group
will continue to route until answered or each station
in the group has been tried. The call will remain at the
last station in the group or will be passed to the
overflow station/group/ VMIB/System Speed bin,
after the overflow timer expires.
PGM 191 + FLEX 8 + Value
(Destination Type 1-4) +
Value (Sta/Hunt
Group/VMIB/Speed Bin) +
[HOLD/SAVE]
VALUES --
1 = Station #
2 = Hunt #
3 = VMIB 00-70
(00 = not assigned)
4 = System Speed
# (2000-2499)
Release 3.5
June 2010