Technical data

Hunt Groups 1-114
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
Ring Hunt Groups
When a call comes into a group, it rings at all of the stations in the group simultaneously until
one of stations answers the call. If an overflow destination has been designated, unanswered
calls can be programmed to be routed to that station or hunt group.
NOTE: Ring/Hunt group name is not supported for external voice mail groups
ADMIN PROGRAMMING
Set Ring Hunt Group Attributes
RING HUNT GROUP ATTRIBUTES
VMIB Announce 1 Timer -- if the call is not answered
during the timer, the System will play the voice mail
announcement that is programmed.
PGM 191 + FLEX 1 + 015
seconds + [HOLD/SAVE]
VALUES --
Range = 000-999
VMIB Announce 2 Timer -- the second voice mail
announcement will be played if call continues to wait
beyond the expiration of 2nd announcement timer.
PGM 191 + FLEX 2 + 000
seconds + [HOLD/SAVE]
VALUES --
Range = 000-999
VMIB Announce 1 Location -- used to play the voice
mail announcement, when the VMIB announce 1
timer expires.
PGM 191 + FLEX 3 + 00
VMIB Announcement
Number + [HOLD/SAVE]
VALUES --
Range = 00-70
(00 = not assigned)
VMIB Announce 2 Location -- used to play the voice
mail announcement, when the VMIB announce 2
timer expires.
PGM 191 + FLEX 4 + 00
VMIB Announcement
Number + [HOLD/SAVE]
VALUES --
Range = 00-70
(00 = not assigned)
VMIB Announce 2 Repeat Timer -- used to repeat the
VMIB announce 2 when the timer expires.
PGM 191 + FLEX 5 + 000
seconds + [HOLD/SAVE]
VALUES --
Range = 000-999
(00 = not assigned)
VMIB Announce 2 Repeat Enable/Disable -- used to
enable or disable the VMIB Announce 2 Repeat.
PGM 191 + FLEX 6 + 0
(Off) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Overflow Destination -- calls to a station in the group
will continue to route until answered or each station in
the group has been tried. The call will remain at the
last station in the group or will be passed to the
overflow station/group/ VMIB/System Speed bin, after
the overflow timer expires.
PGM 191 + FLEX 7 +
Value (Destination Type
1-4) + Value (Sta/Hunt
Group/VMIB/Speed Bin)
+ [HOLD/SAVE]
VALUES --
1 = Station #
2 = Hunt #
3 = VMIB 00-70
(00 = not assigned)
4 = System Speed
# (2000-2499)
Release 3.5
June 2010