Technical data

Hunt Groups 1-100
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
ADMIN PROGRAMMING
Assign Hunt Groups
Enter the appropriate Hunt Group number (620-629) and follow the specific procedure:
Set Hunt Group Attribute
Use PGM 191:
-Circular/Terminal Groups on page 1-99
-UCD Groups on page 1-105
-Ring Groups on page 1-112
-Voice Mail Groups on page 1-114
-Pick-Up Group on page 1-115
Group Type -- assigns the Hunt Group type: Circular /
Terminal / UCD / Ring / VM / Pick-up / Networking VM.
(Note: Use BACK softkey to go back to main entry)
PGM 190 + FLEX 1 + 0
Group Type (refer to
VALUES) +
[HOLD/SAVE]
VALUES -
0 = not assigned
1 = Circular
2 = Terminal
3 = UCD
4 = Ring
5 = VM
6 = Pick up
7 = Networking VM
Pick-up Attribute -- assigns pick-up attributes for the Hunt
Group. All types of Hunt Groups can be assigned the
optional pick-up attribute, except for pick-up hunt group.
PGM 190 + FLEX 2 + 0
(OFF) + [HOLD/SAVE]
VALUES -
0 = OFF
1 = ON
Member Assignment -- the member assignment process
can be executed in two ways: Assigning individually by
pressing the Flexible Button and the desired user to
assign and then enter the station number. The other way
is to successively assign, by entering the first station
number and then the last station number.
NOTE: When there are too many stations to see, you can
scroll data using the volume up/down keys.
PGM 190 + FLEX 3 +
Station NUMBER +
[HOLD/SAVE]
Release 3.5
June 2010