Technical data

External Device Control 1-96
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
ADMIN PROGRAMMING
Set Doorbox/ICM Box Signaling
Assign Station ID
Use PGM 110 … see page 1-17.
Set ICM Box Music Channel
Set ICM Box Timer
OPERATION / SETUP
To call a Doorbox:
1. Go off-hook.
2. Dial the station number of the Doorbox, or press the {Doorbox] flex button.
3. Wait for the warning tone, then announce the call.
To place a call from a Doorbox to an assigned station:
Press [CALL].
To answer an intercom call at a digital phone station assigned for Doorbox signals:
Press the {Doorbox] flex button.
To answer an intercom call at an SLT station assigned for Doorbox signals:
Go off-hook.
Intercom Box Signaling -- if value is set to ON, the station can
receive an intercom box signal.
PGM 111 + FLEX 6 + 1
(On) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
ICM Box / Doorbox Music Channel -- establishes
which music channel will supply music to Doorbox(es)
PGM 171 + FLEX 3 + 0
(Value) + [HOLD/SAVE]
VALUES --
0 = not assigned
1 = Int. Music
2 = External Music
3 = n/a
4-8 = SLT MOH
ICM Box Timer -- designates the ringing time of the
intercom (ICM) box at a Station, when the ICM box user
presses the [CALL] button.
PGM 181 + FLEX 6 +
Value (30 secs, 2 digits) +
[HOLD/SAVE]
VALUES --
Range 00-60
Release 3.5
June 2010