Technical data

Conference Calls 1-93
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
Paging Conference
If a zone page is being initiated, a second user can page simultaneously with the first page
initiator.
CONDITIONS
• The Page Timer is not applied to Paging Conference Group.
• If there is a second page initiator, the "Meet Me Page" feature cannot be used.
• If the first initiator goes on-hook, the conference group paging connection is released.
• A second initiator is sent a page regardless of his/her page access privileges.
ADMIN PROGRAMMING
Enable/Disable the Paging Warning Tone
Enable Paging Access
Use PGM 111, then FLEX 8 … see page 1-172.
Use Conference Page Zone
Set SLT Conference Page Join Code
Use PGM 109, then FLEX 5. For more details, refer to the SBX IP Installation Guide.
OPERATION / SETUP
To join a Conference Page from a digital phone:
Lift the handset, then press [CONF].
To join a Conference Page from an SLT:
1. Lift the handset, then perform a hook-flash.
2. Dial 58.
Page Warning Tone -- if value is set to ON, a page warning
tone will be heard when paging starts.
PGM 161 + FLEX 4 + 1
(On) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Conference Page Zone -- each station can be assigned to
five different conference page zones 06 - 10. All stations
are assigned to None by default.
PGM 119 + FLEX 1- 5
(Zone 06-10, toggle) +
[HOLD/SAVE]
VALUES --
Default = none
Release 3.5
June 2010