Technical data

Call Handling 79
SBX IP 320 Features & Operation Guide
Conditions
• After a menu is programmed, the previous menu list is displayed on the LCD.
• Pressing a flexible button in the Main Menu mode, will activate the flexible button
programming mode.
Admin Programming
• Refer to the SBX IP 320 Programming Guide, Station Programming (Chapter 3, Quick
Reference Admin Programming Tables)
Station Relocation
The Station Relocation Feature lets a user unplug their station and plug it into another location.
Dialing a code followed by the old station number brings all the station attributes including
station number, button mapping, speed dial, and class of service to the new location.
Operation
To store the station attributes to a temporary buffer, use the following procedure:
1. Dial the feature code [TRANS] * 1 (Station Relocation Backup).
2. Unplug the station.
To retrieve stored station attributes, use the following procedure:
1. Plug the phone in at another properly wired jack.
2. Dial [TRANS] * 2 (Station Relocation Retrieve). The station will be relocated; all Station
attributes are copied to the current Station location.
Conditions
• All information for the port of the destination Station will be retained so that it may be
copied or relocated to another port.
• If a different Station type is plugged in at a location, preprogrammed {DSS} buttons are
not guaranteed.
• DKTUs must be relocated to another digital port. DKTUs cannot be relocated to an SLT
port.