Technical data

Call Handling 44
SBX IP 320 Features & Operation Guide
Emergency Intrusion
If an Emergency Supervisor Station calls another station and the Supervisor receives a busy
tone, the Supervisor can dial the Emergency Intrusion code and converse directly with the called
station.
Operation
To activate Emergency Intrusion:
Dial the Emergency Intrusion code '#' while encountering a busy tone.
Conditions
• An Emergency Intrusion call is only possible when the calling station is set to be an
Emergency Supervisor in Admin programming.
• If the station was talking to another station or CO line, the call is disconnected when the
station receives an Emergency Intrusion call.
• The busy station is connected to the Emergency supervisor after a short beep tone
indication.
• An Emergency Intrusion call is not possible to a station in a DND state.
• An Emergency Intrusion call is not possible to an Attendant.
• An Emergency Intrusion call is not possible to a Net DSS.
• An Emergency supervisor is connected to the Master station of a Linked pair if both the
Master and Slave are busy.
• An Emergency supervisor is connected to the Secretary Station instead of Executive
station.
Admin Programming
• Emergency Supervisor (PGM 112 - FLEX 24)